一、液壓設備

1. 小型注塑機、立式注塑機

   鎖模低壓、頂針油壓、射膠低壓回路監測，3MPa 量程剛好匹配低壓預壓油路。

2. 機床液壓站

   磨床、銑床、沖床、油壓夾具夾緊壓力，工裝夾緊油壓多在 1～2.5MPa 區間。

3. 液壓升降平臺、小型油壓頂升設備

   升降負載低壓油壓顯示，過載預警。

4. 橡膠硫化機、小型油壓熱壓機

   平板低壓合模壓力監測。

二、氣動空壓機 / 空壓系統

1. 小型螺桿空壓機、活塞空壓機

   二次穩壓后低壓供氣壓力（工廠標準供氣 0.5～0.8MPa，富余量程容錯）。

2. 儲氣罐、氣動控制柜面板

   車間集中供氣總管壓力監測，嵌入式法蘭安裝適合電控柜開孔。

3. 氣動自動化流水線、氣缸增壓回路

   增壓閥輸出低壓段壓力顯示。

三、水處理、供水、清洗設備

1. 純水機、反滲透 RO 設備

   低壓預處理管路壓力（原水、前置過濾段壓力普遍 1～2.5MPa）。

2. 小型高壓清洗機低壓進水側、管道增壓泵

   進水穩壓監測。

3. 樓宇二次供水、小型供水加壓機組

   生活供水管道壓力監控。

四、橡塑、包裝機械

1. 吹膜機、擠出機冷卻水路

   冷卻水循環管路水壓監測。

2. 全自動包裝機、貼標機、氣動封口機

   整機氣源壓力面板顯示。

3. 發泡設備低壓供氣回路

五、通用工業配套

1. 鍋爐輔機冷卻水路、小型換熱站

   循環水低壓壓力監測。

2. 壓鑄機冷卻水路、模具水路

3. 實驗室試壓臺、小型液壓測試工裝

   低壓試壓 0～3MPa 量程精準觀測。

4. 工程機械附屬低壓油路

   小型農機、小型工程機械液壓輔助回路。

六、選型適配優勢（為什么該型號適合以上場景）

1. Φ100 大表盤，遠距離讀數清晰，車間設備面板標配；

2. BU 背部法蘭嵌入式安裝，直接裝控制柜 / 設備面板，美觀整潔；

3. G3/8 標準液壓氣動常用螺紋，管路接頭通用性強；

4. 0～3MPa 覆蓋絕大多數中低壓水、氣、油工況，不會量程過大導致讀數精度差；

5. 日本DK第一計器DAIICHI KEIKI壓力表，抗輕微壓力脈動，油泵、空壓機抖動環境指針不頻繁晃動。

BT3/8X100X3MPa東洋計器興業TOKO

BT3/8×100×3MPa TOKO (TOYO KEIKI KOGYO)

Complete Specifications of TOKO Pressure Gauge Model BT3/8×100×3MPa

1. Model Code Breakdown (BT3/8×100×3MPa)

• BT: Mounting Style – Type B case with rear flange, bottom radial connection (fixed flange fitted on dial rear for flush mounting on panels and control cabinets)

• 3/8: Connection Thread – G3/8B British parallel pipe thread, bottom radial outlet port

• 100: Dial Diameter – Φ100 mm, enabling clear readings for long-distance observation

• 3MPa: Measuring Range – 0～3 MPa (0~30 bar)

2. Basic Brand Information

Brand: TOYO KEIKI KOGYO CO., Ltd. (abbreviated as TOKO)Standard: Compliant with JIS B7505 standard for Bourdon tube pressure gaugesType: General industrial Bourdon tube pressure gauge

3. Core Technical Specifications

1. Accuracy ClassStandard industrial model: ±1.6% FS; Class 0.6 high-precision version with stainless steel Bourdon tube available as an option.

2. Structure & Materials

• Case: Cold-rolled steel with baked paint, dust-proof sealed construction

• Bourdon Tube / Connection Socket: Brass (standard version); SUS316 stainless steel version optional for corrosive media

• Window: Safety protective glass, equipped with explosion relief back cover

3. Operating Conditions

• Applicable Media: Air, water, hydraulic oil and other fluids non-corrosive to copper alloys

• Ambient Temperature: -20～+60℃

• Allowable Transient Overload: 1.25 times full scale (3.75 MPa for short-term operation)

4. Mounting DimensionsThread: External G3/8 threadΦ100 dial, fixed via cutouts on rear flange for cabinet flush mounting

4. Product Features

• Dust-proof sealed case, durable in dusty and humid workshop environments

• Stable pointer damping; the pointer resists shaking under slight pressure pulsation

• Original Japanese dial marking with standard linear MPa scale and clear graduations

• Type B flange mounting fits panels of machine tools, hydraulic power units, air compressors and injection molding machines

5. Application Scenarios

Measuring range: 0～3 MPa (30 bar), G3/8 thread, Φ100 flush panel mounting. Suitable for medium & low-pressure hydraulic, pneumatic and water supply equipment, categorized by industries as follows:

(1) Hydraulic Equipment

• Small injection molding machines & vertical injection molding machinesMonitor low-pressure mold clamping, ejector oil pressure and low-pressure injection circuits. The 3 MPa measuring range perfectly matches low-pressure preloading oil lines.

• Hydraulic power units for machine toolsClamping pressure for grinders, milling machines, punch presses and hydraulic fixtures. Tool clamping pressure is mostly within 1～2.5 MPa.

• Hydraulic lifting platforms & small hydraulic jacking equipmentLow-pressure oil pressure indication and overload early warning for lifting loads.

• Rubber vulcanizers & small hydraulic hot pressesLow-pressure mold closing pressure monitoring for platens.

(2) Pneumatic & Air Compressor Systems

• Small screw air compressors & piston air compressorsLow-pressure supply pressure after secondary pressure regulation (standard factory supply pressure: 0.5～0.8 MPa with sufficient range margin).

• Air receivers & pneumatic control cabinet panelsMain pipeline pressure monitoring for centralized workshop air supply. Flange flush mounting adapts well to cutouts of electric control cabinets.

• Automated pneumatic production lines & cylinder booster circuitsLow-pressure output pressure indication of booster valves.

(3) Water Treatment, Water Supply & Cleaning Equipment

• Water purifiers & RO reverse osmosis equipmentPressure monitoring for low-pressure pretreatment pipelines (raw water and pre-filter pressure generally 1～2.5 MPa).

• Low-pressure inlet side of small high-pressure cleaners & pipeline booster pumpsInlet pressure stabilization monitoring.

• Building secondary water supply & small water supply booster unitsPressure monitoring for domestic water pipelines.

(4) Rubber, Plastic & Packaging Machinery

• Cooling water circuits of film blowers & extrudersWater pressure monitoring for cooling circulation pipelines.

• Automatic packaging machines, labeling machines & pneumatic sealing machinesPanel display of air source pressure for complete equipment.

• Low-pressure air supply circuits of foaming equipment.

(5) General Industrial Supporting Facilities

• Cooling water circuits for boiler auxiliary equipment & small heat exchange stationsLow-pressure pressure monitoring of circulating water.

• Cooling circuits & mold water lines of die-casting machines

• Laboratory test benches & small hydraulic test toolingAccurate observation for low-pressure testing within 0～3 MPa.

• Auxiliary low-pressure oil circuits of construction machineryHydraulic auxiliary circuits for small agricultural machinery and compact construction equipment.

6. Selection Advantages

• Large Φ100 dial ensures legible readings from a distance; standard configuration for workshop equipment panels.

• Rear flange flush mounting enables direct installation on control cabinets / equipment panels for neat appearance.

• G3/8 thread is widely adopted in hydraulic and pneumatic systems with high compatibility for pipeline fittings.

• 0～3 MPa range covers most medium/low-pressure water, gas and oil working conditions; an excessively wide measuring range will lead to poor reading accuracy.

• TOKO pressure gauge suppresses slight pressure pulsation and avoids frequent pointer vibration under vibration generated by oil pumps and air compressors.

Product Name: TOKO Pressure Gauge BT3/8×100×3MPa