當前位置:昆山瑞騰精密自動化有限公司>>東京計器TOKYO KEIKI>>TOKYOKEIKI電磁閥>> DG4M4-34C-200AC-20-jaTOKYOKEIKI電磁閥DG4M4-34C-200AC-20-JA
DG4V-5-2BL-M-P7L-H-7-40-JA1Y 特殊電磁閥
東京計器電磁閥DG4V-5-7C-M-P9L-TR-6-40
TOKYOKEIKI電磁閥DG4V-5-7C-M-PL-T-6-40
| 3C閥門類別 | 工業 | 動作方式 | 換向 |
|---|---|---|---|
| 流動方向 | 換向 | 使用壓力 | 21mpa |
| 應用領域 | 環保,化工,石油,能源,包裝/造紙/印刷 |
DG4M4:系列名稱 — 超小型濕式電磁鐵液壓換向閥,板式安裝東京計器株式會社
3:閥芯形式 — 3 位 4 通,雙電磁鐵,彈簧對中(斷電自動回中位)東京計器株式會社
4:閥芯規格 — 特殊定制油孔 / 流量規格,滿足特定回路控制需求東京計器株式會社
C:彈簧形式 — 標準彈簧對中型東京計器株式會社
200AC:電氣規格 — AC 200V,50/60Hz 雙頻通用,樹脂封固線圈東京計器株式會社
20:設計編號 — 標準結構與尺寸代碼東京計器株式會社
JA:工廠標準規格標識(符合東京計器原廠品質規范)東京計器株式會社
max.工作壓力:21 MPa東京計器株式會社
max.流量:約 7 L/min(02 規格)東京計器株式會社
適用介質:礦物油、水 - 乙二醇液壓油(F3 規格適配磷酸酯油)東京計器株式會社
介質溫度:-20°C ~ 70°C
安裝形式:疊加板式安裝(墊片密封)東京計器株式會社
響應頻率:max. 500 次 / 分鐘
絕緣等級:F 級
線圈保護:樹脂模注成型,防潮、防塵、防油濺東京計器株式會社
超小型化設計:體積小巧,適配空間緊湊的液壓站與設備集成東京計器株式會社
濕式電磁鐵:低噪音、低功耗、響應快、壽命長,無外泄漏風險
雙頻通用線圈:AC 200V 直接兼容 50Hz/60Hz,無需改線或換線圈東京計器株式會社
彈簧對中可靠:3 位雙電磁鐵,斷電即回中位,防止系統誤動作東京計器株式會社
壓力穩定性強:適配中高壓精密控制回路,適合機床、自動化設備東京計器株式會社
安裝前
沖洗管路(建議≥0.3MPa),清除焊渣、鐵屑、密封膠殘留,避免閥芯卡滯。
核對電壓(AC200V)、壓力、流量、介質與工況是否匹配,嚴禁超參數使用。
確認閥體上 P(進油)、A/B(工作口)、T(回油)口標識,不可裝反。
安裝時
固定閥體再擰接頭,扭矩勿過大,禁止直接受力于線圈組件導致變形。
螺紋密封時,留 1~2 牙不纏生料帶,防止碎屑入閥;液態膠勿過量。
避開強振源;若無法避免,使振動方向與閥芯動作方向垂直。
回油 T 口背壓不得超標,防止閥芯誤動作與內泄增大東京計器株式會社。
電氣與操作
電壓波動控制在 **±10%** 以內,建議配斷路器 / 熔斷器防過載、短路。
雙電磁鐵嚴禁同時通電;切換時先斷一側,再通另一側東京計器株式會社。
高壓下避免長時間持續通電,防止閥芯粘滯、切換失效東京計器株式會社。
手動應急按鈕僅用于調試,高背壓時操作力會顯著增大。
維護與安全
維修 / 拆解前必須斷電、泄壓,掛牌警示,佩戴護具。
定期檢查:有無滲漏、線圈異常發熱、異響、換向遲緩。
密封件、彈簧、閥芯磨損后務必使用原廠備件更換。
長期停用:排空存油、防潮防塵;重新啟用前先空載測試數次。
機床:液壓夾具、工作臺、刀庫、主軸平衡缸
注塑 / 壓鑄機:頂針、抽芯、模厚調整、安全門控制
自動化線:小型液壓缸 / 馬達的方向與速度控制
輕工機械:液壓沖床、包裝機、紡織機械的精密控制回路
電壓變更:
DC24V:DG4M4-34C-24DC-20-JA
AC100V:DG4M4-34C-100AC-20-JA
閥芯形式變更(3 位雙電磁鐵):
標準 O 型機能:DG4M4-30C-200AC-20-JA
其他定制機能:DG4M4-36C-200AC-20-JA
Tokyo Keiki Solenoid Valve DG4M4-34C-200AC-20-JA
DG4M4: Series Name – Miniature solenoid directional valve (gasket mounting, wet armature type), designed for medium and high-pressure hydraulic systems, with a compact structure that saves installation space.
3: Spool Type – Spring-centered type (3-position, double solenoid), ensuring the spool automatically resets to the neutral position when the solenoid is de-energized, avoiding system misoperation and improving operational safety.
4: Spool/Spring Arrangement – Special customization specification, with a tailored spool configuration to meet specific flow and directional control needs of different hydraulic circuits.
C: Additional Configuration – Standard configuration, compatible with common hydraulic media and general industrial installation scenarios, no additional customization required for conventional applications.
200AC: Solenoid Voltage – AC 200V, dual-frequency (50/60Hz) resin-molded coil, corrosion-resistant and moisture-proof, adapting to different power supply environments without rewiring.
20: Design No. – Standard design code, representing the basic structural parameters, manufacturing standards, and material specifications of the valve body.
JA: Special Mark – Standard product identification, indicating compliance with Tokyo Keiki’s original factory quality standards, technical specifications, and after-sales service requirements.
Item | Specification |
|---|---|
Maximum Operating Pressure | 21 MPa (suitable for medium and high-pressure hydraulic systems) |
Maximum Flow Rate | Approx. 7 L/min (matches the miniature size, meeting the flow demand of small to medium hydraulic actuators) |
Solenoid Voltage | AC 200V, dual-frequency (50/60Hz), resin-molded coil with two terminals |
Applicable Fluid | Mineral oil-based fluid, water-glycol-based fluid; optional for phosphate ester fluid (marked with "F3" in the model) |
Operating Temperature Range | -20°C ~ 70°C (adapts to most industrial working environments) |
Mounting Type | Gasket mounting (compact structure, easy to install and disassemble, convenient for maintenance) |
Maximum Switching Frequency | 500 cycles/min (ensures rapid response of the hydraulic system) |
Insulation Class | Class F (meets industrial insulation standards, ensuring safe operation under long-term use) |
Machine tool hydraulic systems: Directional control of feed mechanisms, clamping mechanisms, tool changing mechanisms, and coolant control systems.
Injection molding machines/die casting machines: Control of mold opening, mold closing, ejection, and material feeding mechanisms.
Automatic production lines: Directional control of hydraulic actuators (such as cylinders and motors) in assembly lines, conveying lines, and sorting equipment.
Light industrial hydraulic equipment: Compact hydraulic systems requiring precise directional control, such as small hydraulic presses, packaging machinery, and textile machinery.
DC 12V: DG4M4-34C-12DC-20-JA
DC 24V: DG4M4-34C-24DC-20-JA
AC 100V: DG4M4-34C-100AC-20-JA
Spring offset A type (2-position, single solenoid): DG4M4-32A-200AC-20-JA
Spring offset B type (2-position, single solenoid): DG4M4-32B-200AC-20-JA
Standard spring-centered type (3-position, double solenoid): DG4M4-30C-200AC-20-JA
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,化工儀器網對此不承擔任何保證責任。
溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。