美國DeFelsko PosiTest G 機械式涂層測厚儀
特點：
精確：
隨機提供NIST可追溯證書
高耐磨碳鋼探頭，保證長時間使用和精確度的連續性
儀表蓋可以打開，方便進行校準
符合美國和標準
耐用：
堅固的外殼，抗沖擊，水，酸，和溶劑
外觀設計*，測量過程中可充分定位，不會發生偏轉問題
只通過前端探頭位置接觸測量面也可*定位
無需電池
使用簡單：
測量結果可直接讀取，達到涂層厚度時，探頭回彈
V型槽可對圓柱形產品準確定位
不受重力影響，可用于任何地方
PosiTest 機械式涂層測厚儀技術參數：
FM： 量程： 0-80mils
精度：±0.2misl ＜4msil
±5%讀數 ＞4msil
F ： 量程：0-2000μm
精度：±5μm ＜100μm
精度：±5%讀數 ＞100μm
GM: 量程：0-8 mils
精度：±0.04mils ＜0.8mils
±5%讀數 ＞0.8mils
G ：量程：0-200μm
精度：±1μm ＜20μm
±5%讀數 ＞20μm
| PosiTest magnetic pull-off thickness gage for the non-destructive measurement of non-magnetic coatings (paint, enamel, galvanizing, metalizing, plating, etc.) on steel. |
|
 - Certificate of Calibration showing traceability to PTB included with every gage
- Matching Calibration Standards and Procedures available for every model
- Highly wear resistant Carbide Probe for longest life and continuous accuracy
- Remove center of dial cover for easy calibration adjustment
- Conforms to national and international standards
 - Extra rugged housing, not affected by mechanical shock, water, acid or solvents
- Unique overall design, fully supported, positive positioning, no pivoting tendencies during measurement
- Can be used fully supported or with only the front probe area contacting the surface
- Functions on a permanent rare-earth cobalt magnet
- No batteries/electronics
- 2 year warranty
Easy To Use - Positive visual and audible indicators to designate when
thickness reading is established - “V” grooves in probe housing and Gage base allow correct
positioning on cylindrical objects - Compact, lightweight, precisely balanced, independent of
gravity – can be used in any position - GO/NO-GO button can be pre-set for rapid measurement
- Probe contact and dial rotation all in a one-finger operation
- Furnished with wrist strap and instructions in a high quality
leather case with belt loops for your convenience
| | 
Easily measures small parts of almost any shape
|
| |
Carbide measuring probe for long life |
您好, 歡迎來到化工儀器網
