Detailed product information 詳細產品信息

General

• Specific applications

• Growth promotion testing
  Bioburden testing
  Sterility testing
  Environmental monitoring
  Microbial limit testing
  Rabbit pyrogen testing
  Bacterial endotoxin testing
  Preservative efficacy testing
  Antimicrobial effectiveness testing
  Disinfectant testing
  Aseptic processingFiltration Efficiency TestingEfficacy testingInhibition testingMedia testingPreparatory test controlQuality control strainTestingTesting antimicrobial agentsTesting antimicrobial handwashing formulationsTesting disinfectantsDrug discoveryFood testingPharmaceutical and Personal CareTesting sanitizersTesting bactericidesQuality control strain for Biosynth productsThis strain is recommended by ATCC for use in the tests described in military specification MIL G-13734B where only the taxon is specified.Recommended as a test microorganism for EP 2.6.1 Sterility
  Recommended as a test microorganism for EP 2.6.12 Microbial Examination of Non-Sterile Products: Microbial Enumeration Tests
  Recommended as a test microorganism for EP 2.6.27 Microbiological Control of Cellular Products
  Recommended as a test microorganism for EP 2.6.31 Microbiological Examination of Herbal Medicinal Products for Oral Use
  Recommended as a test microorganism for EP 2.7.2 Microbiological Assays of Antibiotics
  Recommended as a test microorganism for EP 5.1.3 Efficacy of Antimicrobial Preservation
  Recommended as a test microorganism for JP 16 4.05 I Microbiological Examination of Non-sterile Products: Total Viable Aerobic Count
  Recommended as a test microorganism for JP 16 4.05 II Microbiological Examination of Non-sterile Products: Tests for Specified Micro-organisms
  Recommended as a test microorganism for JP 16 4.06 Sterility Test
  Recommended as a test microorganism for JP 16 5.02 Microbial Limit Test for Crude Drugs
  Recommended as a test microorganism for JP 16 G4 Microorganisms: Preservatives-Effectiveness Tests
  Recommended as a test microorganism for JP 16 G8 Quality Control of Water for Pharmaceutical Use
  Recommended as a test microorganism for JP 16 Monographs
  Recommended as a test microorganism for USP<1072>Disinfectants and Antiseptics
  Recommended as a test microorganism for USP<2021>Microbial Enumeration Tests
  Recommended as a test microorganism for USP<51>Antimicrobial Effectiveness Testing
  Recommended as a test microorganism for USP<60>Microbiological Examination of Nonsterile Products: Tests for Burkholderia cepacia Complex
  Recommended as a test microorganism for USP<61>Microbiological Examination of Nonsterile Products: Microbial Enumeration Tests
  Recommended as a test microorganism for USP<62>Microbiological Examination of Nonsterile Products: Tests for Specified Microorganisms
  Recommended as a test microorganism for USP<71>Sterility Tests
  Recommended as a test microorganism for USP<72>Respiration-Based Microbiological Methods for the Detection of Contamination in Short-Life Products
  Recommended as a test microorganism for AATCC TM 100: Test Method for Antibacterial Finishes on Textile Materials: Assess
  Recommended as a test microorganism for AATCC TM 147: Antibacterial Activity Assessment of Textile Materials: Parallel Streak Method
  Recommended as a test microorganism for EPA Method MB-05-16: AOAC Use Dilution Method for Testing Disinfectants
  Recommended as a test microorganism for EPA Method MB-06-10: Germicidal Spray Products as Disinfectants (GSPT): Testing of Staphylococcus aureus, Pseudomonas aeruginosa, and Salmonella enterica
  Recommended as a test microorganism for EPA Method MB-09-08: Disinfectant Towelette Test: Testing of Staphylococcus aureus, Pseudomonas aeruginosa, and Salmonella enterica
  Recommended as a test microorganism for EPA Method MB-19-06: Preparing a Pseudomonas aeruginosa or Staphylococcus aureus Biofilm using the CDC Biofilm Reactor
  Recommended as a test microorganism for EPA Method MB-25-05: OECD Quantitative Method for Evaluating Bactericidal and Mycobactericidal Activity of Microbicides Used on Hard, Non-Porous Surfaces
  Recommended as a test microorganism for EPA Method MB-27-04: Germicidal and Detergent Sanitizing Action of Disinfectants Test
  Recommended as a test microorganism for EPA Method MB-41-00: Method for the Evaluation of Antimicrobial Activity of Hard, Nonporous Copper-Containing Surface Products
  Recommended as a test microorganism for AENOR UNE-EN 1276: Evaluation of chemical disinfectant or antiseptic for bactericidal activity
  Recommended as a test microorganism for ASTM D2574: Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms
  Recommended as a test microorganism for ASTM E2315: Standard Guide for Assessment of Antimicrobial Activity Using a Time-Kill Procedure
  Recommended as a test microorganism for ASTM E640: Standard Test Method for Preservatives in Water-Containing Cosmetics
  Recommended as a test microorganism for ISO 11930: Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product
  Recommended as a test microorganism for ISO 16187: Footwear And Footwear Components - Test Method To Assess Antibacterial Activity
  Recommended as a test microorganism for ISO 20645: Textile fabrics — Determination of antibacterial activity — Agar diffusion plate test
  Recommended as a test microorganism for ISO 20743: Textiles — Determination of antibacterial activity of textile products
  Recommended as a test microorganism for ISO 22196: Measurement of antibacterial activity on plastics and other non-porous surfaces
  Recommended as a test microorganism for JIS L 1902: Antimicrobial Test – Textiles
  Recommended as a test microorganism for JIS Z 2801: Assessment of Antimicrobial Activity of Hard Non-Porous Surfaces

• Preceptrol

• No

Handling information

• Medium

• ATCC Medium 18: Trypticase Soy Agar/Broth

• Temperature

• 37°C

• Atmosphere

• Aerobic

• Handling procedure

• 
  

1. Open vial according to enclosed instructions.

2. Using a single tube of #18 broth (5 to 6 mL), withdraw approximately 0.5 to 1.0 mL with a Pasteur or 1.0 mL pipette. Rehydrate the entire pellet.

3. Aseptically transfer this aliquot back into the broth tube. Mix well.

4. Use several drops of the suspension to inoculate a #18 agar slant and/or plate.

5. Incubate the tubes and plate at 37°C for 24 hours.

• Handling notes

• Two colony types may be observed when growing this strain on blood agar plates.
  This strain is also available as certified reference material (ATCC CRM-6538).
  Additional information on this culture is available on the ATCC® web

Quality control specifications

• Verification method

• Whole-genome Sequencing

History

• Deposited as

• Staphylococcus aureus subsp. aureus Rosenbach

• Depositors

• FDA

• Chain of custody

• ATCC <-- FDA <-- AMC

• Type of isolate

• Human

• Cross references

• GenBank DQ212950 Staphylococcus aureus strain ATCC 6538 16S ribosomal RNA gene, partial sequence.

Legal disclaimers

• Intended use

• This product is intended for laboratory research use only. It is not intended for any animal or human therapeutic use, any human or animal consumption, or any diagnostic use.

• Warranty

• The product is provided 'AS IS' and the viability of ATCC® products is warranted for 30 days from the date of shipment, provided that the customer has stored and handled the product according to the information included on the product information sheet, website, and Certificate of Analysis. For living cultures, ATCC lists the media formulation and reagents that have been found to be effective for the product. While other unspecified media and reagents may also produce satisfactory results, a change in the ATCC and/or depositor-recommended protocols may affect the recovery, growth, and/or function of the product. If an alternative medium formulation or reagent is used, the ATCC warranty for viability is no longer valid.  Except as expressly set forth herein, no other warranties of any kind are provided, express or implied, including, but not limited to, any implied warranties of merchantability, fitness for a particular purpose, manufacture according to cGMP standards, typicality, safety, accuracy, and/or noninfringement.

• Disclaimers

• This product is intended for laboratory research use only. It is not intended for any animal or human therapeutic use, any human or animal consumption, or any diagnostic use. Any proposed commercial use is prohibited without a license from ATCC.

  While ATCC uses reasonable efforts to include accurate and up-to-date information on this product sheet, ATCC makes no warranties or representations as to its accuracy. Citations from scientific literature and patents are provided for informational purposes only. ATCC does not warrant that such information has been confirmed to be accurate or complete and the customer bears the sole responsibility of confirming the accuracy and completeness of any such information.

  This product is sent on the condition that the customer is responsible for and assumes all risk and responsibility in connection with the receipt, handling, storage, disposal, and use of the ATCC product including without limitation taking all appropriate safety and handling precautions to minimize health or environmental risk. As a condition of receiving the material, the customer agrees that any activity undertaken with the ATCC product and any progeny or modifications will be conducted in compliance with all applicable laws, regulations, and guidelines. This product is provided 'AS IS' with no representations or warranties whatsoever except as expressly set forth herein and in no event shall ATCC, its parents, subsidiaries, directors, officers, agents, employees, assigns, successors, and affiliates be liable for indirect, special, incidental, or consequential damages of any kind in connection with or arising out of the customer's use of the product. While reasonable effort is made to ensure authenticity and reliability of materials on deposit, ATCC is not liable for damages arising from the misidentification or misrepresentation of such materials.

  Please see the material transfer agreement (MTA) for further details regarding the use of this product. The MTA is available at web

References

Curated Citations

Connolly P, et al. The use of impedance for preservative efficacy testing of pharmaceuticals and cosmetic products. J. Appl. Bacteriol. 76: 68-74, 1994. PubMed: 8144407

ASTM International StandardTest Method for Efficacy of Sanitizers Recommended for Inanimate Non-Food Contact Surfaces. West Conshohocken, PA

ASTM International Standard Test Method for Preservatives in Water-Containing Cosmetics. West Conshohocken, PA

AOAC International Germicidal and detergent sanitizing action of disinfectants. Gaithersburg, MD:AOAC International;AOAC "Official Methods of Analysis of the AOAC International" 960.09.

AOAC International Bacteriostatic activity of laundry additive disinfectants. Gaithersburg, MD:AOAC International;AOAC "Official Methods of Analysis of the AOAC International" 972.04.