可程序-太陽能板-熱循環試驗機--系統規格表 Programmable PV(Thin-Film) Thermal Cycling Tester |
Model | PV-Thin-Film- 8-CP-SD |
外型尺寸 Exterior dimension | 485 * 600 * 600 mm (W*H*D)(包含突出部份) |
標準Channel Standard Channel | 1 Channel / 模塊 / 300W (每臺8 channel) 1 channel / module / 300W (max 8 channel/set) |
zui大控制模塊數量 Maximum control Module | 8模塊 / 2.4KW 8 module / 2.4KW |
設定方式 Method of Test setting | 以Channel設定為單位 (開始/停止) 每Channel獨立控制,可設定不同電壓與電流 Set Channel (start/stop) ; each Channel single control ,can set different Voltage & Current |
Channel輸出電壓/電流范圍 CH. Output volt/current range | AC 0~150V/ 0~2000mA(0.1V/1mA/Step) / channel |
操作模式 Operation mode | 定電壓/定電流 切換模式 CV/CC Switch Mode |
數據取樣速度與通訊界面 sample rate & com interface | 1Sec~59:59mm:ss (Sample to Controller) , 5sec (Sample to PC) & RS485 or RS232 |
Continuous Mode ON-OFF Mode | 可選擇連續輸出 可選擇ON-OFF脈波設定(0~59,59mm:ss), cycle設定功能(10位數) |
電壓/電流 設定/zui大試驗時間 Voltage/Current Setting / Max test time | 測試電壓與電流---(電壓與電流設定 正電壓與電流 設定) / 9999.9Hr Test Volt.& current –(setting of bias positive volt/current /test positive volt/current setting)/9999.9Hr |
數據讀取&連結臺數 Data reading & link number of machines | 同時讀取/ 記錄各channel電壓/電流 值/溫度/chamber溫濕度值 zui多32臺 read /record value of the voltage & current & temp. of channel and T/H values of each Chamber /max 32 Set |
輸出準確度與表頭分辨率 Output & indicator | 1%±2mA & 0.1V/1mA |
電壓/電流 值 轉換圖形曲線 Voltage / Current values Conversion curve | 記錄電壓與電流與溫度值可轉換為圖形曲線 record the voltage and current &Temp. values of each Channel can convert the Curve |
電壓/電流/板溫 分析 Voltage /Current/Temp. Analysis | 記錄 電壓/電流/溫度 開始/取樣/結束時間 Recording of the start /sample/ end time of voltage/ current/ temp. |
EXCEL報表轉換 Excel report conversion | 條件設定數據,量測數據,電壓短路數據轉換成EXCEL檔案 Set condition data, measurement data and voltage shortage data converted as Excel file |
電源 Power Source | AC 220V/25A , 50/60Hz |