當前位置:昆山瑞騰精密自動化有限公司>>德國AFRISO索菲>>索菲AFRISO壓力測量>> dmu 600/20德國菲索AFRISO壓力變送器DMU600/20
德國菲索AFRISO壓力表KP 63/100/160 Ch,D4
| 產地類別 | 進口 | 應用領域 | 環保,石油,能源,電子/電池,綜合 |
|---|
德國菲索AFRISO壓力變送器DMU600/20
| 型號: | DMU 600/20 |
| 品牌: | AFRISO |
特殊的OEM產品
緊湊的結構
耐高壓
無傳輸液

德國菲索AFRISO壓力變送器DMU600/20 技術參數
| 應用 | 用于空氣,化學氣體(濕度0-85% rH,非冷凝),水,油,汽油等介質的電子壓力檢測。不適于會與玻璃,硅,不銹鋼304或硅膠起反應的介質. |
| 描述 | 壓力變送器將物理壓力轉換成與壓力成正比的電信號。DMU600/20的測量單元是硅壓變電阻。 |
精度等級 | 相對特征曲線(參照IEC 60770 -極限值校正)的偏差(非線性,遲滯,重復性):< ± 0.3 % FSO |
| 量程 | 相對壓力0/4 bar到 0/40 bar |
過載保護 | 至少 2 x滿量程 (瞬間峰值至少2 x滿量程) |
工作溫度 | 環境:-25/ +85 ℃ 介質:-25/ +85 ℃ 貯藏:-40/ +85 ℃ |
溫度影響 | 補償范圍內 -10/ +70 ℃ < 0.2% FSO/ 10K |
動態特性 | 響應時間:< 1 ms |
過程連接 | G1/4B,DIN3852 type E |
材質 | 外殼:不銹鋼SUS304 壓力連接接頭:不銹鋼SUS304 膜片:硅,玻璃 密封:硅 |
電源 | DC 9 -32 V |
輸出信號 | 4 – 20 mA 2線 |
負載電阻 | 4 – 20 mA ≤ (UB – UBmin )/ 0.02A Ω |
電流輸入 | 4 – 20 mA < 25 mA |
電氣保護 | 短路保護,正負極接反保護 |
電氣連接/防護等級 | 插頭和接線盒符合 ISO 4400 (DIN 43650-A) 防護等級:IP 65 |
CE認證標準(EMC) | EMC Directive 2014/30/EU |
| 可選項 | ■其他測量量程 ■其他過程連接 ■其他電氣連接 ■固定電纜連接 ■其他輸出信號,如0-10 V,0-5 V ■**壓力檢測 |
德國菲索AFRISO壓力變送器DMU600/20
AFRISO DMU600/20 Pressure Transmitter (Germany)
Model: DMU 600/20
Brand: AFRISO
Product Introduction
Special OEM product
Compact design
High pressure resistance
No liquid transmission
Technical Specifications
Application
Electronic pressure measurement for media including air, chemical gases (humidity 0–85% rH, non-condensing), water, oil, gasoline, etc.
Not suitable for media that react with glass, silicon, SUS304 stainless steel or silicone.
Description
The pressure transducer converts physical pressure into an electrical signal proportional to the pressure.
The measuring cell of the DMU600/20 is a silicon piezoresistive sensor.
Accuracy Class
Deviation from the characteristic curve (non-linearity, hysteresis, repeatability)
with reference to IEC 60770 (limit value correction):
< ±0.3 % FSO
Measuring Range
Relative pressure: 0/4 bar up to 0/40 bar
Overload Protection
At least 2 × full scale
(short-term peaks: at least 2 × full scale)
Operating Temperature
Ambient: -25 … +85 ℃
Medium: -25 … +85 ℃
Storage: -40 … +85 ℃
Temperature Influence
Within compensated range (-10 … +70 ℃):
< 0.2% FSO / 10 K
Dynamic Characteristics
Response time: < 1 ms
Process Connection
G1/4B, DIN 3852 Type E
Materials
Housing: SUS304 stainless steel
Pressure connection: SUS304 stainless steel
Diaphragm: silicon, glass
Seal: silicone
Power Supply
DC 9 – 32 V
Output Signal
4 – 20 mA, 2-wire
Load Resistance
4 – 20 mA ≤ (UB – UBmin) / 0.02 A Ω
Current Input
4 – 20 mA < 25 mA
Electrical Protection
Short-circuit protection, reverse polarity protection
Electrical Connection / Protection Degree
Plug and connector according to ISO 4400 (DIN 43650-A)
Protection degree: IP65
CE (EMC)
EMC Directive 2014/30/EU
Options
■ Other measuring ranges
■ Other process connections
■ Other electrical connections
■ Fixed cable connection
■ Other output signals, e.g. 0–10 V, 0–5 V
■ Pressure detection
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,化工儀器網對此不承擔任何保證責任。
溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。