![]() |
上海申思特自動化設備有限公司
主營產品: 美國E E傳感器,美國E E減壓閥,意大利ATOS阿托斯油缸,丹麥GRAS麥克風,丹麥GRAS人工頭, ASCO電磁閥,IFM易福門傳感器 |
聯系電話
![]() |
上海申思特自動化設備有限公司
主營產品: 美國E E傳感器,美國E E減壓閥,意大利ATOS阿托斯油缸,丹麥GRAS麥克風,丹麥GRAS人工頭, ASCO電磁閥,IFM易福門傳感器 |
聯系電話
2026-2-27 閱讀(291)
EXA 開放式直線光柵尺/ EXA linear encoder安裝手冊/ Installation manual手冊編號:14460091 版本號:1110/ Manual code: 14460091 version: 1110準備鋼帶鋼帶的安裝/TAPE INSTALLATION鋼帶的安裝1-固定鋼帶的起始端2-然后開始安裝剩下的部分3-慢慢的去掉掮套4-慢慢的去掉背膠保護膜TAPE INSTALLATION1- Apply the beginning of the steel tap2- Begin installing the rest3- Gradually remove the protection4- Gradually remove the adhesiveBand applying tool for easier installationAA-M reference Optional accessorySold separately配套的輔助安裝工具請參考AA-M,這是可選附件,需另行訂貨CAUTION注意事項DIMENSIONS mm (1) 圖 紙(1)DIMENSIONS mm (2)圖 紙(2)DIMENSIONS mm (3)圖 紙(3)參考點和限位塊的安裝INSTALLATION OF: REFERENCE MARKS, AND TRAVEL LIMITS參考點磁勵感應塊和限位磁勵感應塊都帶膠,可以很容易在把它們安在合適的位置。The reference marks and travel limits come with a sticker forputting them in place.把磁勵參考點感應塊對齊鋼帶上的參考點標記。每50mm一個參考點標記,。Line up the magnetic reference mark with the optical reference mark (every 50 mm on the steel band).* 每50mm一個參考點標記。* The reference marks may be positioned at will every 50 mm.鋁質參考點和限位塊的安裝INSTALLATION OF: REFERENCE MARKS, AND TRAVEL LIMITS鋁材質的參考點磁勵感應塊和限位磁勵感應塊有兩種安裝方式,一種是螺釘固定,一種是粘接固定。鋁材質的感應塊是可選附件,需要單獨訂貨。Sold separately Screw-on option把磁勵參考點感應塊對齊鋼帶上的參考點標記。每50mm一個參考點標記,。Line up the magnetic reference mark with the opticalreference mark (every 50 mm on the steel band).* 每50mm一個參考點標記。* The reference marks may be positioned at will every 50 mm.讀數頭的安裝READER HEAD MOUNTING有效測量長度的位置選擇與光柵尺的保護MEASURING LENGTH (CM)LINEAR ENCODER PROTECTION1 Vpp SIGNAL INTERFACE/輸出 1 Vpp 正弦信號差分信號RS-422協議(EIA標準)/DIFFERENTIAL INTERFACE RS-422 (EIA STANDARD)輔助安裝說明使用L2/AL和SSD測試器來調整讀數頭與鋼帶的間隙至最佳狀態。SSD的LED指示燈可以顯示讀數頭是否處于最佳位置。L1/AL指示燈的顯示,可以對電壓進行測量,你也可以借助這項功能來進行調整。NOTE FOR MOUNTING ASSISTANCETo adjust the best gap of the band-head set, use pin L2/AL and the EXPOSED-TESTER. The LED’s of this device will indicate the best position of the reader head. You can also make this adjustment using a volt meter displaying the voltage at pin L1/AL.TRAVEL LIMITS L1-L2 (mm)/ 限位L1-L2 (毫米)TRAVEL LIMITS L1-L2/ 行程限位L1-L2